Site parameters identify the weather station and represent some station site conditions,
such as elevation from sea level. The station-specific site parameters belong to the
parameter group site.
-
In the Web UI, go to .
-
Under the parameter group site, set the following:
- altitude
- Type the weather station altitude from the mean sea level in meters. This setting
is needed only if your weather station measures barometric pressure.
- latitude
- Type the station latitude coordinate.
- longitude
- Type the station longitude coordinate.
- pressureSensorLevel
- Type the height of the pressure sensor in meters from the ground. This setting is
only needed if your weather station measures barometric pressure.
- If you have a WXT530 Series sensor in your
installation, type its installation height. If you do not have WXT530, type the
installation height of AQT530.
- station_name
- Define a name for the station. Do not use spaces or special characters in the
station name.
-
To save the changes and take them into use, select Save and restart
script.