Disassembling mast - DKE110F

DKE110F Retrofit Guide
Document code
M211891EN
Revision
C
Language
English
Product
DKE110F
Document type
User guide
  • 4‑mm and 6‑mm Allen keys
  • 17‑mm and 30‑mm wrenches
Replace the lowest mast tube with the new one.
  1. Disconnect mast tube 1 from mast tube 2.
    1
    Mast tube 2
    2
    Joining element (yellow)
    3
    Mast tube 1
    4
    Washer DIN125 B8.4 (4 pcs)
    5
    Hex screw ISO4762 M8×20 (4 pcs)
    1. Remove the screws and washers that hold the joining element in mast tube 1.
    2. Pull the mast tubes apart. Leave the joining element in mast tube 2.
  2. Remove the hex nut and hinge bolt from the mast base.
    1
    Base plate
    2
    Hinge bolt with hex nut
    3
    Foundation bolt (3 pcs)
    4
    Thin hex nut ISO4035 M20 (6 pcs)
    5
    Hex nut ISO4032 M20 (3 pcs)
  3. Carefully lower the mast tube on the foundation.
  4. Remove the nuts that hold the bottom part of the base plate on the foundation.
    Do not remove the hex nuts that level the base plate.
  5. Lift up the base plate from the foundation bolts.