- 1
- Service port connection indicator
- 2
- Battery level indicator
- 3
- Currently measured values
- 4
- Connection indicators
- 5
- Status LED. Blinks green for normal operation, red for error or alarm.
- 6
- Signal strength of access point connection
- 7
- Alarm indicators. Alarms are configured in viewLinc Enterprise Server software.
- 8
- Detachable probe, or extension cable
- 1
- Service port (micro-USB). If using external power supply, connect it here.
- 2
- Info button. Push to enable info mode for 1 hour, and again to end the info mode. Info mode cycles through information screens, and also enables faster wireless scanning.
| See RFL100 User Guide (M211861EN) for more information on service port and info mode. |
- 1
- Type label
- 2
- On/off switch
- 3
- Clock battery
- 4
- Probe orientation mark. When connecting the probe, line up the markings on the probe and above the connector before pushing the probe to the connector.
- 5
- Humidity and/or temperature sensors under the filter
- 6
- Release button. Push to release RFL100 from its current viewLinc system, and allow it to connect to any viewLinc system.
- 7
- Main batteries. Use only non-rechargeable, AA size, 1.5 V alkaline (LR6) or lithium (FR6) batteries.
- 8
- Battery cover
- 1
- 6 mm (0.23 in) hole for hook mounting
- 2
- Holes for mounting with cable ties
- 3
- Strong magnet (in magnetic mounting bracket only). Handle with care.
- 4
- Suitable area for attaching labels
- 5
- 3.80 mm (0.15 in) holes for screw mounting