HMT330WPA is an installation kit for mounting the warmed probes of the HMT330 and PTU300 transmitters, and the Indigo-compatible HMP7 and TMP1 probes. The installation kit enables you to combine the probe heads of the warmed probe and the additional temperature probe into an easily manageable unit that can be supported by a cable conduit or a threaded bar.
Note the following:
- Point the probes downward to prevent condensed water from collecting inside the installation kit.
- If you are using a cable conduit to support the installation kit, seal the upper end of the conduit.
- Install thermal insulation if external environment is in different temperature than the measured space.
