Check the diameter of your probe from the
probe's user documentation, available at www.vaisala.com.
|
- HMK15 basic lid with four
measurement holes
- Suitable for Ø12 mm probes with
short (< 7 mm) sensor legs
- Ø13.5 mm hole for the thermometer
delivered with HMK15
- Product examples:
- HMD60
- HMM100
- HMP1, HMP3, and HMP9
- HMP75
- HMP110, HMP113, and HMP115
- HMT333
- HMP70 series probes can be used as
reference probes in the Ø13.5 mm hole with an adapter
- Spare part item codes:
- Salt chamber with basic lid and
transit cover: DRW255417SP
- Basic lid only: 271549
|
|
|
|
- HMK15 universal lid for Ø12, Ø13.5,
and Ø18.5 mm probe models
- Ø18.5 mm hole for HPP270 series
probes
- Suitable for probes with long
(> 7 mm) sensor legs, needing a calibration adapter (refer to your probe's user
guidance if uncertain)
- Product examples:
- HMP4, HMP5, and HMP7
- HMP76, HMP77
- HMP155
- HMT334, HMT335, HMT337, and
HMT338
- Spare part item codes:
- Salt chamber with universal lid
and transit cover: 19766HM
- Universal lid only: 271550
|
|
|
|
- HMK15 custom lid with four
measurement holes for HMP110 probes with the filter on
- Suitable for Ø12 mm probes with
short filters when calibration with the filter on is required for regulatory
reasons
- Ø13.5 mm hole for the thermometer
delivered with HMK15
- Product examples:
- Spare part item code of lid:
253277SP
|
|
|
|
- HMK15 custom lid with four
measurement holes for DMT132 and HMP60/HMP110 probes with the filter on, or other
Ø12 mm probe models
- Topmost hole is raised higher than
the others and has an ISO G1/2" thread for mounting DMT132 tightly
- Spare part item code of lid:
230914
|