Configuring DA10 laser bandwidth - DA10

Configuring DA10 Laser Bandwidth Technical Note
Product status
Document code
M213286EN-B
ft:locale
en-US
Product
DA10
Document type
Technical note

You can change the laser bandwidth for one measurement unit or both measurement units. The measurement units can have different laser bandwidth.

Check that the instrument uses firmware version 2.5. Update the firmware if needed. For the firmware package and instructions, go to docs.vaisala.com.

  1. Open a connection to DA10.

    For instructions on opening a connection to the device, see DA10 User Guide.

  2. After logging in, select the DAC measurement unit to modify.

    In the following example, the unit with serial number V4142511 is selected for modifying.

  3. Change Laser bandwidth factor to the desired value and select Save.

    The following window opens.

  4. Repeat the steps for the other measurement unit, if needed.