You can select how many measurement
parameters (1 to 6) you want to see in the Measurements view on the touchscreen display. You can also select the number of Measurements views.
Configurable Measurements view with slots for 1 to 6 measurement parameters
Before you start, make sure that the
measurement devices you want to use are connected to the transmitter.
Select at the bottom left corner of the touchscreen.
The View settings window opens.
In the View settings window, you can:
Select how many parameters are
shown in the Measurements view.
Select Add new view to add a new Measurements view.
Select Delete view to delete a Measurements view. You can delete a Measurements view only when you have more than 1 view.
To add new measurement parameters to the view, select the + symbol, or the measurement
parameter if one has already been selected.
The Select parameter view opens.
In the Select parameter view, select which parameters are shown in the different slots in the Measurements view. In the Select parameter view, you can:
Select Select to confirm your selection.
Select Cancel to exit the view without saving your changes.
Select Clear to clear the slot.
From software version 1.23.1
onward, the transmitter supports the full range of measurement parameters. The available
parameters depend on the connected measurement device. For device-specific information on
supported measurement parameters, see the user guidance of your measurement device at docs.vaisala.com.