Installing Mobotix with Quick Connect - Quick Connect

Quick Connect for Mobotix Fixed Camera Installation Guide
Product status
Document code
M213251EN-A
ft:locale
en-US
Product
Quick Connect
Document type
User guide
  • Mobotix M16 fixed camera
  • Quick Connect for Mobotix (QUICKCAM)
  • Locking key (DRW262203)
  • Ceramic or Teflon paste to prevent corrosion, oxidation, and seizing
  • 4‑mm and 5‑mm Allen keys
  1. Detach the Quick Connect from the mounting bracket.
    1. Insert the locking key (1) into the Quick Connect (2) and turn it clockwise to detach the bracket (3).
    2. Detach the locking key from the Quick Connect by turning it counterclockwise.
  2. Attach the camera to the Quick Connect.
    1. Detach the Quick Connect top part (1) by removing the 2 hex screws.
    2. Attach the top part (1) to the camera mounting frame (2) with the 4 hex screws. Apply paste to the screws.
    3. Connect the camera Ethernet cable (3) to the RJ45 connector coupler (4).
    4. Attach the camera (5) to the camera mounting frame with the 4 hex screws. Apply paste to the screws.
    5. Attach the camera to the bottom part (6) with the 2 hex screws. Apply paste to the screws.
    6. Connect the sensor cable (7).
  3. Attach the Quick Connect mounting bracket (1) to the support arm (2). Tightening torque 5 Nm.
  4. Mount the camera using the locking key.
    1. Insert the locking key (1) into the Quick Connect (2) and turn it clockwise to lock it into place.
    2. Hang the camera on the mounting bracket.
    3. Detach the locking key from the Quick Connect by turning it counterclockwise.
    4. Route the cable along the bottom of the support arm.