- 1
- Service port connection indicator
- 2
- Battery level indicator
- 3
- Currently measured values
- 4
- Connection indicators
- 5
- Status LED. Blinks green for normal operation, red for error or alarm.
- 6
- Signal strength of access point connection
- 7
- Alarm indicators. Alarms are configured in monitoring system software.
- 8
- Detachable probe, or extension cable
- 1
- Service port (micro-USB). If using external power supply, connect it here.
- 2
- Info button. Push to enable info mode for 1 hour, and again to end the info mode. Info mode cycles through information screens, and also enables faster wireless scanning.
| See RFL100 Data Logger User Guide (M211861EN) for more information on service port and info mode. |
- 1
- Type label
- 2
- On/off switch
- 3
- Clock battery
- 4
- Probe orientation mark. When connecting the probe, line up the markings on the probe and above the connector before pushing the probe to the connector.
- 5
- Humidity and/or temperature sensors under the filter
- 6
- Release button. Push to release RFL100 from its current viewLinc Enterprise Server system, and allow it to connect to any other viewLinc ES system. This button is disabled on devices that are pre-configured for operation with viewLinc Cloud or Jade Smart Cloud.
- 7
- Main batteries. Use only non-rechargeable, AA size, 1.5 V alkaline (LR6) or lithium (FR6) batteries.
- 8
- Battery cover
- 1
- 6 mm (0.23 in) hole for hook mounting
- 2
- Holes for mounting with cable ties
- 3
- Strong magnet (in magnetic mounting bracket only). Handle with care.
- 4
- Suitable area for attaching labels
- 5
- 3.80 mm (0.15 in) holes for screw mounting