| Wear personal protective equipment
(PPE). |
Make sure that you have the replacement spare part available.
-
Switch off power supply to the device.
Make sure that there is no power available for the system.
-
Loosen the screw that tightens the device to the mounting adapter.
-
Lift the device up and disconnect the device cable from the device.
-
Disconnect the device cable from your system and remove the cable.
-
Route the replacement cable through the mounting adapter.
-
Install and wire the device as instructed in WM80 Setup Guide
(M212994EN).
-
Recycle the old cable according to the recycling instructions.