Configuring device heating - WM80

WM80 User Guide

Document code
M212995EN
Revision
A
ft:locale
en-US
Product
WM80
Document type
User guide

You can configure the device heating over Modbus RTU or by using Vaisala Insight PC software.

CAUTION Be careful with the settings because the device may not operate optimally if the heating settings are changed from the factory defaults.
  1. Create a connection to the device with Insight PC software.
  2. Select the settings icon ( ) and Configure device.
  3. Select Heating and configure the following settings.
    Maximum current
    Maximum current the heating is allowed to use.
    Temperature setpoint
    Target temperature the heating control aims to maintain.
    Heating on/off
    Select On to apply heating (default).