Configuring NMEA 0813 settings - WM80
WM80 User Guide
- Document code
- M212995EN
- Revision
- A
- ft:locale
- en-US
- Product
- WM80
- Document type
- User guide
-
Create a connection to the device with Insight PC software.
-
Select the settings icon () and Configure device.
-
Select Communication and configure the following settings.
- Bit rate
- Select the bit rate.
- Parity, data, stop bits
- Select the parity, data, and stop bits.
- Interface mode
- Select ASCII/NMEA.
-
Select ASCII/NMEA from the left and configure the following setting.
- NMEA talker ID
- Identifier for NMEA messages to allow the use of several devices on the same
bus.
- Wind speed unit
- Select m/s or kn.
- Autosend format
- Select NMEA MWV.
- Autosend interval
- Message sending interval for the selected autosend format.
-
Select Save.