Select the battery capacity with the BMU801
rotary switch according to the battery in your system. BMU801 automatically detects if there
are 1 or 2 batteries connected. The connected batteries should have the same capacity. This
means that even if there are 2 batteries, you only need to select the capacity once.
CAUTION Make sure that you select
the same capacity as the battery in your system has. Incorrect selection can cause damage to
the battery and prevent or limit operation.
Using a flat head screwdriver (max. 2.5 mm), turn the rotary switch on top of BMU801
until the arrow points to the desired position.
0
External control (battery capacity is configured by an external host
device)
