VaiNet RFL100 Series
RFL100 series data loggers connect using Vaisala VaiNet protocol. To use VaiNet data loggers in your network, you require an AP10 access point. Refer to the RFL100 and AP10 device documentation for complete setup and configuration instructions.
| Connected and configured RFL100 devices are automatically recognized by viewLinc. |
HMT140 Series
HMT140 series data loggers connect using Wi-Fi protocol. To add HMT140 series data loggers to your network, you will need an HMT140 configuration cable and HMT140 Utility software (shipped with the device). Refer to the HMT140 device documentation for complete setup and configuration instructions.
| Connected and configured HMT140 devices are automatically recognized by viewLinc. |