Ethernet connection - viewLinc 5.1

Connecting Digi IX20 modem to viewLinc Enterprise Server Technical Note

Document code
M212919EN
Revision
A
Language
English
Product
viewLinc 5.1
Document type
Technical note
Figure 1. Connecting Digi IX20 to the viewLinc server over Ethernet
1
Digi IX20 modem
2
DB-9F Console Adapter (Digi part number 76000697)
3
Straight-wiring LAN cable
4
Digi PortServer device
5
Ethernet connection
6
viewLinc server
  1. Connect the DB-9F Console Adapter (2) to the Serial (DTE) port on the Digi IX20 modem (1).
  2. Connect a straight-wiring LAN cable (3) between the RJ45 jack on the DB-9F Console Adapter (2) and an RS-232 port on the Digi PortServer device (4).
  3. Connect the Digi PortServer (4) to the network with an Ethernet cable (5).
  4. Use the installation software provided with your Digi PortServer device (4) to configure the device, and install it as a COM port on the viewLinc Server (6).
  5. Verify the COM port number of the connection:
    1. Open the Windows Control Panel.
    2. Go to Device Manager.
    3. Select Ports (COM and LPT).
    4. Locate the serial port and make note of the port number.