Detaching the unwinder pin - RS41-SGE - RS41-SGPE

RS41-SGE and RS41-SGPE User Guide
Document code
M212917EN
Revision
B
Language
English
Product
RS41-SGE
RS41-SGPE
Document type
User guide

To start using the RS41 unwinder, you must first detach the unwinder pin from the unwinder body.

  1. The unwinder pin (number 1 in the following figure) is attached between two plastic clips in the unwinder hook (number 2). Detach the pin from between the plastic clips and pull it out from the unwinder bottom plate (3).
    If the unwinder pin is tightly attached to the bottom plate, it is a good idea to slightly twist the unwinder pin before pulling it out.
  2. When you pull the unwinder pin out, make sure that the string unwinds and that it is not tangled.
    Figure 1. RS41 unwinder details
    1
    Unwinder pin
    2
    Unwinder hook
    3
    Unwinder bottom plate
    4
    Unwinder clip