Configuring serial line connection - AWS810-SOLAR

AWS810 Solar Edition Configuration and Maintenance Guide

Document code
M212906EN
Revision
B
Language
English
Product
AWS810-SOLAR
Document type
User guide

You can configure observation messages to be sent automatically to a local serial line connection through port COM_C4_TEL (RS‑232/RS‑485 connection), if the port is available in the weather station.

  1. In the Web UI, go to Settings > Station parameters.
  2. Under the parameter group features, set the Active value to on for the SMSAWS_SERIAL_1 parameter. This enables the message format (SMSAWS) and the use of serial line for data reporting.
  3. To save the changes and take them into use, select Save and restart script.
    When the script has restarted, refresh the browser to get the changes visible.
  4. In the COM_C4_TEL parameter group, configure the serial line connection settings.
    baud
    Connection speed (default = 9600).
    databits
    Number of data bits used in characters (default = 8).
    stopbits
    Number of stop bits used (default = 1).
    parity
    Parity setting.
    portType
    Serial port type.
  5. To save the changes and take them into use, select Save and restart script.