Restoring factory default settings - AWS810-SOLAR

AWS810 Solar Edition Configuration and Maintenance Guide

Document code
Document type
User guide
You can restore all device settings to the factory default settings in the following cases:
  • You have forgotten your administrator username or password to the Web UI.
  • You want to remove the configuration and all settings from DMU801, for example, when replacing DMU801 in a weather station with a device that has been in use earlier.
Pressing the Reset button briefly reboots DMU801.

Pressing and holding the Reset button down for 10 seconds resets DMU801. All device settings are reverted back to factory settings. After the factory reset, you need to reconfigure the settings.

When you connect to the Web UI the next time, you will be prompted to give the device activation code and create a user account.

  1. Unplug the USB‑C cable (if connected).
  2. Press and hold down the Reset button in the DMU801 front panel with a small pin for 10 seconds.

    The reset takes up to 1 minute.

  3. After the reset, log in to the Web UI, give the device activation code, and create a new user account.
  4. Configure all the settings again.