|
- Familiarize yourself with the safety instructions of the installation site.
- Loosen the screws on the refractometer cover with a TX20 Torx key. Be careful not to drop the bolts. Keep the bolts for later use.
- Loosen the screws on the desiccant capsule holder using a TX10 Torx key.
- Remove 3 old desiccant capsules.
- Install 3 new desiccant capsules.
- Reinstall the desiccant capsule holder. Tighten the screws to 0.7 Nm with a TX10 Torx key.
- Reinstall the refractometer cover. Tighten the screws to 2 Nm using a TX20 Torx key. Be careful not to overtighten. The screws may break.
- Recycle removed parts according to the recycling instructions in PR53 Series User Guide (M212898EN).