Starting up refractometer with Indigo520 - PR53 - PR53AC - PR53AP - PR53GC - PR53GP - PR53M - PR53SD - PR53W

PR53 Series User Guide

Document code
M212898EN
Revision
F
ft:locale
en-US
Product
PR53
PR53AC
PR53AP
PR53GC
PR53GP
PR53M
PR53SD
PR53W
Document type
User guide
  1. Connect the refractometer to the Indigo520 transmitter using the interconnecting cable. Make sure the 8th character of the configuration code on the Indigo520 type label is "L".
  2. Connect the wires from the refractometer to Indigo520 probe port 1 or 2 according to chapter Refractometer connections.
    Indigo520 transmitter provides the power supply for the refractometer and initializes the communication with the sensor automatically.
  3. After the refractometer has been detected, configure the numerical and graphical display views and analog output channels using the Indigo520 display or the web user interface.
    If you have the optional prism wash system installed, you need to perform a prism wash test. See PR53 Prism Wash System User Guide (M212808EN).