Configuring device location - DA10

DA10 User Guide

Document code
M212895EN
Revision
D
ft:locale
en-US
Product
DA10
Document type
User guide
  • Laptop
  • USB-C cable or Ethernet cable

When starting to use DA10 or moving it to a new location, define the device location information in the Web UI. This information helps to distinguish several devices from each other and provides metadata for the measurements.

In the DMU Web UI, change only those settings and parameters that are instructed in the DA10 documentation. Leave the other settings and parameters as they are.
  1. In the Web UI, go to Settings > Station parameters.
  2. Select site, and type the altitude, height offset, latitude, and longitude information, and set a name for the instrument or site in station_name.
    • For altitude the range is −500 ... 9000 meters.
    • For height offset, the range is −1000 ... 1000 meters.
    • For latitude the range is −90.000000 ... 90.000000.

    • For longitude the range is −180.000000 ... 180.000000.

    For altitude and height offset, the resolution is full meters. For values below ground or sea level, use a negative value (−).

  3. Select Save and restart script.