Installing shock absorber - CL61

Installing CL61 Shock Absorber Installation Note

Document code
M212869EN
Revision
A
Language
English
Product
CL61
Document type
User guide
  • Wrench

The CL61 shock absorber is for stabilizing effects in rough conditions, for example, in maritime environments.

Install the shock absorber according to these instructions. For the complete CL61 installation, see CL61 Installation Guide (M212474EN).

1
Ceilometer
2
Shock absorber
3
Ceilometer pedestal
  1. Attach the shock absorber to a fixed structure.

    Check the orientation. The fixing points are not placed symmetrically on the shock absorber.

    1
    Fixing points for attaching shock absorber to selected surface (6 pcs, 3 on either side)
  2. Remove the nuts, screws, and washers from the 4 fixing points.
    1
    Fixing points for attaching ceilometer to shock absorber (4 pcs)
  3. Lift the ceilometer on the shock absorber and secure in place.
    1
    Screw (4 pcs)
    2
    Washer (4 pcs)
    3
    Spring washer (4 pcs)
    4
    Nut (4 pcs) (not shown, underneath shock absorber)
Figure 1. CL61 dimensions with shock absorber