Selecting parameters and units shown on transmitter display - INDIGO300

Indigo300 User Guide

Document code
M212849EN
Revision
C
ft:locale
en-US
Product
INDIGO300
Document type
User guide

If your transmitter model has a display, you can use the Indigo80 handheld indicator to select which measurement parameters from the probe connected to the transmitter are shown on the display.

You can also change the units of measurement parameters. For example, you can change the temperature unit from Celcius (°C) to Fahrenheit (°F). You can also change the units to metric/non-metric all at once.

The unit selection has an effect on entering configuration values (for example, whether you must enter analog output scale settings as ppm or % values).

To select the parameters and units shown on the transmitter display:

  1. Connect the transmitter to the indicator.
  2. Open the indicator main menu by pressing .
  3. Select Devices. If you have more than one device connected to the indicator, make a further selection between the devices.

    In this case, select Indigo300.

  4. Select Settings > Displayed parameters.
  5. In Display parameter 1, 2, and/or 3, select the parameter you want.

    The selectable parameters depend on the probe.

  6. To change the units of measurement parameters:
    • To change units of individual parameters, select Settings > Displayed units, and then select the parameter of your choice, for example, Temperature.
    • To change all applicable units to metric/non-metric, select Settings > Display > Units > Metric or Non-metric.
  7. Exit the menu by pressing or return to the main menu by pressing .

The selected parameters and units will appear on the transmitter display. The measurement and graph views shown on the Indigo80 display are not affected.