CAUTION Do not energize the power
supply before the wiring has been connected.
The transmitter wiring options include a
lead-through at the backside and lead-throughs on the bottom.
Indigo300 wiring options and cable
diameters
1
Wiring from the back
Cable diameter: 5–10 mm
(0.20–0.39 in)
2
Wiring through a M20×1.5 gland or conduit fitting NPT 1/2"
Cable diameter for M20 gland:
7–13 mm (0.26–0.51 in)
3
Wiring through a M16×1.5 gland or conduit fitting NPT 1/2"
Cable diameter for M16 gland:
2–6 mm (0.08–0.24 in)
If you are using a 24 V AC
power supply for the transmitter, make sure to use separate cables for the AC power and the
analog outputs to ensure that the EMC requirements are fulfilled.