- 1
- Display (optional, selected when ordering the transmitter)
- 2
- Push button for display navigation (only transmitters that have a display)
- 3
- Serial number and device configuration code for the options selected with the Vaisala order form
- 4
- Locking wheel with a connector for probe or probe cable. Alternatively, this lead-through can be ordered with a fixed cable and M16×1.5 cable gland pre-installed.
- 5
- Lead-through for cables. Plugged, or equipped with a M16×1.5 cable gland or an NPT 1/2" conduit fitting.
- 6
- Lead-through for cables. Plugged, or equipped with a M20×1.5 cable gland or an NPT 1/2" conduit fitting.
- 7
- Grounding terminal
- 8
- Service port for connection to Insight PC software or Indigo80 handheld indicator
- 9
- LED status indicator
- 10
- Rubber lead-through for cables, at the back
- 11
- Transmitter base: mounting base and screw terminals for cables
- 12
- Top cover: optional display and circuit board
The lead-through options (locking wheel, cable glands, conduit fittings, and plugs) are selected when ordering the transmitter. For example configurations and explanations for your device's configuration code, see Indigo300 Order Form (G010008EN).