Vaisala Insight PC software - INDIGO201 - INDIGO300 - SWINSIGHT10

Indigo300 User Guide

Document code
M212849EN
Revision
C
ft:locale
en-US
Product
INDIGO300
Document type
User guide
Vaisala Insight PC software is a configuration software for Vaisala Indigo-compatible probes and transmitters. Insight is available for the Windows operating system (64-bit only). For a full list of supported operating system versions, see vaisala.com/insight.
To ensure support for your transmitter, download the latest version of Insight at vaisala.com/insight.

With the Insight PC software connected to your transmitter, you can:

  • See real-time measurements and device and status information
  • Configure, test and adjust the analog output channels of the transmitter
  • Calibrate and adjust the probe connected to the transmitter
  • Configure the transmitter settings (for example, display settings and metric/non-metric units of measurement parameters)
  • Configure the connected probes' features and settings. The available features and settings depend on the probe model and firmware version. For more information, see your probe's user documentation at docs.vaisala.com.
CAUTION The service port connection is only intended for temporary use during configuration, and must not be used for permanent installations. The IP rating and EMC properties of the transmitter can be affected when the service port is open.
To connect the Indigo transmitter to the Vaisala Insight PC software, you must have the Vaisala USB Device driver installed on your computer.