Transmitters with a display show the status of the transmitter and the connected probe on the display. If you turn the display off, the transmitter uses an LED indicator to inform you of the device status.
In non-display transmitters, the device status is indicated by the LED only. To see, for example, active warning messages, connect the transmitter to the Insight PC software or Indigo80 handheld indicator.
The following table describes the LED statuses in both transmitter models (with and without the display).
LED color | Description |
---|---|
Not lit | Power is off. |
Green, blinking | The transmitter is starting up or no probe is connected, or there is an active warning in the transmitter and/or the connected probe. |
Green, solid | The transmitter and the connected probe are both working normally. Normal measurement. |
Red, blinking | The transmitter and/or the connected probe is in error state. Connect the transmitter to the Insight PC software or Indigo80 handheld indicator to get more information and to configure. |