Transmitter display - INDIGO200 - INDIGO300

Indigo300 User Guide

Document code
M212849EN
Revision
C
ft:locale
en-US
Product
INDIGO300
Document type
User guide
Indigo300 display, numerical mode
1
Display view navigation icons
2
Message field for notifications, warnings, and errors
3
Active connection to Insight PC software or Indigo80 handheld indicator

In transmitters with a display, you can configure the display to show 1 to 3 measurement parameters in numeric and graph format. Notifications, warnings, and errors are shown on a message row on the top part of the display.

The displayed parameters and units, display brightness, and display mode (numeric or graph) can be configured with the Insight PC software or Indigo80 handheld indicator.

By default, the display shows the output parameters configured for the transmitter's analog outputs. If no output parameters have been configured for the analog outputs, the display shows the preferred parameters of the connected probe.

To view measurement data from a non-display version of the transmitter, connect the transmitter to the Insight PC software or Indigo80 handheld indicator.

Switching between display views and turning display off and on

To switch between different display views, push the left button on the front cover once.

To turn the display off and on, keep the left button pressed down for a few seconds. You can also turn the display off and on with Insight PC software or Indigo80 handheld indicator. When the display is off, the LED status indicator lights up to inform about the device status.