Connecting probes - INDIGO300

Indigo300 User Guide

Document code
M212849EN
Revision
B
Language
English
Product
INDIGO300
Document type
User guide
CAUTION Only connect compatible measurement devices to the transmitter. Attempting to connect incompatible devices or cables can damage the equipment. Refer to transmitter specifications for compatibility information.
Figure 1. Connecting probes to Indigo300 transmitter
1
Probes are locked in place with the locking wheel. Never turn from the probe body.
2
Probe connection cables are connected in the same way as probes: insert the cable in the connector and hold in place while turning the locking wheel.
3
Probes are inserted into the probe connector with the orientation mark and/or the Vaisala logo facing out.
  1. Insert the probe into the probe connector with the orientation mark and/or the Vaisala logo on the probe body facing out. Note the orientation of the cable connector pins when inserting.
  2. Hold the probe in the probe connector and lock it in place by turning the locking wheel counterclockwise.
  3. When the transmitter recognizes the connected probe, it shows a notification message on the display (for example, Probe Connected: GMP251).