LED status indicator - INDIGO300

Indigo300 User Guide

Document code
M212849EN
Revision
B
Language
English
Product
INDIGO300
Document type
User guide

Transmitters with a display show the status of the transmitter and the connected probe on the display. If you turn the display off, the transmitter uses an LED indicator to inform you of the device status.

In non-display transmitters, the device status is indicated by the LED only. To see, for example, active warning messages, connect the transmitter to the Insight PC software or Indigo80 handheld indicator.

The following table describes the LED statuses in both transmitter models (with and without the display).

Table 1. LED statuses
LED color Description
Not lit Power is off.
Green, blinking The transmitter is starting up or no probe is connected, or there is an active warning in the transmitter and/or the connected probe.
Green, solid The transmitter and the connected probe are both working normally. Normal measurement.
Red, blinking The transmitter and/or the connected probe is in error state. Connect the transmitter to the Insight PC software or Indigo80 handheld indicator to get more information and to configure.