Transmitter base - INDIGO300
Indigo300 Quick Guide
- Document code
- M212848EN
- Revision
- B
- Language
- English
- Product
- INDIGO300
- Document type
- User guide
Figure 1. Indigo300 transmitter base with screw
terminals
- 1
- Rubber lead-through for wiring from the back
- 2
- Cable strain relief clip and its mounting holes. The clip can be installed
horizontally or vertically.
- 3
- Probe connection terminals. Delivered pre-wired.
- 4
- Locking wheel or M16×1.5 cable gland for probe connection
- 5
- Lead-through with plug, M16×1.5 cable gland or NPT1/2" conduit fitting
- 6
- Lead-through with plug, M20×1.5 cable gland or NPT1/2" conduit fitting
- 7
- Grounding terminal
- 8
- Power supply input terminals
- 9
- Analog output terminals
- 10
- Enclosure breathing membrane. Do not remove or pierce.