3. Aligning surface temperature sensor (FMP103 only) - TempCast

Vaisala TempCast Setup and Replacement Guide

Document code
M212844EN
Revision
B
Language
English
Product
TempCast
Document type
User guide
1. Loosen the finger screws to adjust the sensor angles. The sensor rotates 180° and tilts 60°. 2. Attach the aiming tool on the sensor. The tool can be positioned on either side of the device.

3. Look through the aiming tool to aim the sensor at the measurement point. Tighten the finger screws and remove the tool.

The offset from the tool to the sensor is 10 cm (3.94 in).