Vaisala Insight PC software is a configuration
software for Vaisala Indigo-compatible probes and transmitters. Insight is available for the
Windows operating system (64-bit only). For a full list of supported operating system
versions, see
http://www.vaisala.com/insight.
With the Insight PC software, you can:
- See real-time measurements and device and
status information
- Configure the transmitter settings (for
example, display mode)
- Configure outputs and relays
- Configure
serial communication (for example, Modbus) settings
- Calibrate and adjust the probe connected to
the transmitter
Indigo200 transmitters can be
connected to Insight PC software with a standard USB-C cable (type C to A or type C to C). For
instructions on connecting the transmitter to Insight, see Connecting to Insight PC software.
| The USB cable connection to Insight
is only intended for temporary use during configuration, and must not be used for permanent
installations. The IP rating and EMC properties of the transmitter can be affected when the
USB port is open. |
| To connect the Indigo
transmitter to the Vaisala Insight PC software, you must have the Vaisala USB Device driver
installed on your computer. |