Analog output configuration overview - INDIGO201 - INDIGO200SERIES

Indigo201 User Guide

Document code
M212842EN
Revision
A
Language
English (United States)
Product
INDIGO201
INDIGO200SERIES
Document type
User guide

Indigo201 has 3 analog outputs that can be configured with Insight PC software. Each output has the same set of configuration options in the analog output 1 — 3 menus under the Configure Device menu (Analog output 1 shown in example).

Note that the available selections depend on the probe that is connected to the Indigo201 transmitter (for example, CO2 output parameter selection is only available for CO2 probes).
Figure 1. Analog output configuration options example
Note that the Analog output type selection in the General menu defines whether the outputs are used for voltage or current output.
Figure 2. Analog output type (current or voltage) selection

Receiving analog output settings automatically from probe

Indigo201 can receive the analog output settings automatically from the connected probe in the following cases:
  1. The transmitter is a new unit and has not been configured yet.
  2. The analog output configuration has been removed from the transmitter by a user.
It is recommended to always review the analog output settings with Insight PC software after connecting a probe.