Figure 1. Insight software main menu view with Indigo200 transmitter and connected probe 1 Select to access Insight main menu. Configure Device: display and graph options, output and relay settings, parameter and unit selection, environmental compensation settings, filtering factor, probe options, and general settings. Export Settings: creates a text file export of the device settings. Calibrate: options for calibrating and adjusting the measurement of the connected probe, adjusting outputs, viewing adjustment data, and restoring factory adjustments. Various reset, factory default settings, and restart options for transmitter and probe. About Device: general device information such as serial number and software version. 2 Select Settings to switch between the Basic Mode and Advanced Mode user modes, change the units of parameters (metric/non-metric), enter a factory code to access restricted functionalities, or view information about the Insight software. 3 Monitoring provides options for monitoring and recording selected parameters, and exporting the monitoring data as a CSV (comma-separated values) file. 4 Device information menu with the following tabs: Measurements: measurement graph view with parameter drop-down selection. Calibration information: read-only information about the latest stored calibration. Diagnostics: troubleshooting and administrative information about the device status. Also includes options for exporting the device error log and other diagnostics information as files (CSV/ZIP). When contacting Vaisala support, it is recommended to include an up-to-date export of the error log with the support request.