Display and LED indicator - INDIGO201 - INDIGO200SERIES - INDIGO200

Indigo201 User Guide

Document code
English (United States)
Document type
User guide

Indigo201 transmitters can be ordered either with the optional display, or as a non-display model that uses an LED indicator for notifications. In the display model, measurements can be viewed in numerical and graph format from the display, and status notification messages are shown on the bottom of the display. In the non-display model, the LED indicator is used to inform about the device status.

Figure 1. Indigo200 display with relays, three parameters and USB connection notification
Relay A and relay B status
Display screen view navigation icons
Active USB connection notification icon
Message field for notifications, warnings and errors

The Indigo display can be configured to show 1-3 measurement parameters. Information about the transmitter and connected probe (for example, notifications and warnings) is shown on a message row at the bottom of the display. Relay and USB connection status are also shown on the display as applicable.

The parameters shown on the display, display brightness, and display mode (numeric or graph) can be configured with Insight PC software.

Switching between screen views and turning display off and on

To switch between different screen views, push the left button on the front cover once. To turn the display off and on, keep the left button pressed down for a few seconds.