Removing probe from process - BALLVALVE-1

Ball Valve Kit (BALLVALVE-1) Installation Guide
Document code
M212837EN
Revision
A
Language
English
Product
BALLVALVE-1
Document type
User guide
Figure 1. Removing probe from process
1
The groove on the probe indicates the adjustment limit when pulling the probe up. Pull the probe up until the groove is visible before closing the ball valve.
CAUTION Make sure that you pull the probe out far enough. If you close the ball valve before the groove is visible, you may damage the probe body or filter.
2
Ball of the ball valve in closed position