Attaching probes and cables - INDIGO200SERIES - INDIGO202

Indigo202 Quick Guide
Document code
M212816EN
Revision
B
Language
English
Product
INDIGO200SERIES
INDIGO202
Content type
Product description
Product description > Features
Product description > Functions
Document type
User guide
Figure 1. Attaching probes and cables to Indigo200
1
Probes are locked in place with the locking wheel. Never turn from the probe body.
2
Connect probe cables in the same way as probes: insert the cable in the connector and hold in place while turning the locking wheel.
3
Insert probes into the probe connector with the orientation mark facing out.
Check the connection instructions in your probe's documentation. Certain probes can only be connected using a cable.
  1. Insert the probe into the probe connector with the orientation mark on the probe body facing out.
  2. Hold the probe in the probe connector and lock it in place by turning the locking wheel counterclockwise. Do not turn the probe body when attaching, only the locking wheel on the transmitter.
  3. When the transmitter recognizes the connected probe, it shows a notification message on the display (for example, Probe Connected: GMP251).