- 1
- Probe and probe cable connector inside the locking wheel
- 2
- Wiring from the back: cut open the seal. See Wiring options.
- 3
- Rubber cable lead-through with strain relief. See Wiring options.
- 4
- Screw terminals for analog outputs 1-3. See Terminal wiring.
- 5
- Screw terminals for relays A and B. See Terminal wiring.
- 5
- Screw terminals for 24 V power supply input. See Terminal wiring.
CAUTION Do not energize the power supply before the wiring has been connected. |