Mounting AQT530 on pole mast - BWS500

BWS500 Setup Guide
Document code
M212787EN
Revision
C
ft:locale
en-US
Product
BWS500
Document type
User guide
The recommended installation height for AQT530 is 2 … 4 m (6 ft 7 in … 13 ft).
The minimum distance between AQT530 and EGW501 is 1 m (3 ft).
  • Avoid installing AQT530 next to trees or other vegetation.
  • Avoid installing AQT530 to direct sunlight or near other heat sources.
  • Make sure that power lines or generators cannot affect the performance.
  1. Attach steel bands to the bracket. Attach the bracket to the pole mast and tighten the screws in the steel bands.
  2. Connect the sensor cable to AQT530.
  3. Attach AQT530 to the mounting bracket. Tighten the screw and nut to keep AQT530 firmly in place.