Mounting GMP252 on pole mast - BWS500

BWS500 Setup Guide

Document code
M212787EN
Revision
A
Language
English (United States)
Product
BWS500
Document type
User guide
The U‑bolt is suitable for pole masts with diameter Ø 30 … 60 mm (1.18 … 2.36 in).
  1. Attach the probe support plate onto the pole support plate with 4 screws. Place the U‑bolt on the pole mast and push the ends of the U‑bolt through the support plates. Tighten the 2 U‑bolt nuts.
  2. Mount the radiation shield DTR250 onto the probe support plate with 2 screws.
  3. Insert the GMP252 probe through the threaded gland.
  4. Insert the probe into the radiation shield. Tighten the threaded gland.
  5. Connect the cable.