Attaching solar panel to over 63 mm (2.48 in) diameter pole mast - BWS500

BWS500 Setup Guide

Document code
English (United States)
Document type
User guide
Before you begin, wipe solar panel clean. Orient power supply unit and solar panel towards the midday sun.
Attach SOL501 to the pole mast with 2 brackets. When the mast diameter is over 63 mm (2.48 in), use steel bands for attaching.

Install power supply unit PSU501 at the same time with the solar panel.

  1. Place PSU501 to the solar panel frame and secure with 4 screws.
  2. Attach 2 pole mount brackets to the frame with 4 screws.
  3. Attach the power supply unit with the solar panel frame to the pole mast with steel bands.
  4. Tighten the bands and screws.
  5. Slide the solar panel to the holder and tighten the screws inside the holder.