The Select module chooses the layers to be reported by the algorithm. The first step is to assign high cloud cover to a single cloud layer. If the highest layer is above the threshold height, high cloud cover is assigned to that layer; otherwise a synthetic layer is created at 43 000 feet. The second step is to determine which layer to report as the lowest one. After the lowest layer has been determined, the Select module rounds layer heights into 100 feet precision. Layers closer than 100 feet to the layer that is below them or whose sky cover is 1/16 or lower (less than 1/2 octas) are combined with the layers that are immediately below them. The height of the combined layer is the height of the lower layer. If the number of layers is still more than the number of layers requested, the algorithm combines the layer which covers the least amount of sky to the layer that is below it. This is done as many times as necessary to reduce the number of layers to the requested number. The lowest layer is not checked in either of the above two conditions.
The last phase of the Select module is to calculate the cumulative cloud cover for the reported layers. This value is the sum of the sky cover of the layer and all the layers below it converted into integer octas. The cumulative cover of 8 octas is only reported if the layer is the highest layer and if the total sky cover from the Select module is 8 octas.