Configuring environment settings with Indigo80 handheld indicator - INDIGO80

Indigo80 User Guide

Document code
Document type
User guide
  • Probe connection cable

For optimal measurement accuracy, you can use the Indigo80 handheld indicator to give additional information about the connected probe’s measurement environment.

The environment settings available via Indigo80 correspond to the environmental compensation settings of the probe. Therefore, Environment settings and Settings > Compensation setpoints are interconnected: the configuration set in either menu is applied to both.
  1. Connect the probe(s) to the indicator.
  2. Open the main menu by pressing .
  3. Select Devices. If you have more than one device connected to the indicator, make a further selection between the devices.
  4. Select Environment settings to access the settings for your probe.

    The available environment settings depend on the probe and probe firmware version.

    For detailed information on the probe-specific requirements for the settings, such as Pressure and Temperature, see your probe's user documentation.

  5. Exit the menu by pressing or return to the main menu by pressing .