Fastening magnetic hanger accessory - INDIGO80

Indigo80 User Guide

Document code
Document type
User guide
CAUTION The optional magnetic hanger of Indigo80 contains a strong magnet. Handle it with care and keep it away from devices that are sensitive to magnetic fields (for example, pacemakers, magnetic cards, and mechanical watches).
CAUTION If you need to replace the M4×14 hex screws on the back cover of Indigo80 with new ones, make sure the replacing screws are identical to the original ones: exactly 14 mm (0.55 in) in length. Screws that are shorter or longer than 14 mm (0.55 in) may damage the device or compromise its ingress protection.

A magnetic hanger is available as an optional accessory for attaching Indigo80 to metallic surfaces while taking measurements. Vaisala item code of the hanger is ASM214318SP.

  • 2-mm Allen key for the M4×14 hex screws on the back cover of Indigo80
  1. Detach any USB or probe connection cables from Indigo80.
  2. Turn off Indigo80 by pressing the power button for 2 seconds.
  3. Place the indicator on a clean, flat surface, with the display facing down.
  4. Remove the topmost screw from the back cover and place it aside.
  5. Position the screw hole of the magnetic hanger on Indigo80, with the text VAISALA on the hanger facing out.
  6. Keep the hanger positioned in line with Indigo80 and tighten the screw to fasten the hanger into place.