3. Installing device - GroundCast

Vaisala GroundCast Setup and Removal Guide
Product status
Document code
M212671EN-H
ft:locale
en-US
Product
GroundCast
Document type
User guide
  • GroundCast device activated
  • Device holder
  • Dummy block

  • Sealant pack (2 pcs)

    Installation of 1 device requires 1 - 2 sealant packs (1 pack has 450 ml).

  • Sealant applicator
  • Protective clothing (PPE) and road safety equipment
Keep an extra pack of sealant available.
  1. Clean the device holder of possible sealant residue from previous installations.

    Place the device in the holder.

  2. Prepare the sealant.

    The sealant dries in 5 minutes.

  3. Empty the sealant into the hole.
  4. Press the device in the hole aluminum cover pointed down.

    Rotate the device slightly so that the sealant flows over the edge and spreads evenly around the device. If the sealant does not flow over, or if you are unable to press the device in completely, do not pull the device out. Continue the installation according to step 5 and then see Fixing incorrect installation.

  5. Press the device down firmly for 5 minutes until the sealant is dry.

    The device holder must touch the road surface.