2. Recycling device - GroundCast

Vaisala GroundCast Setup and Removal Guide

Product status
Document code
M212671EN-H
ft:locale
en-US
Product
GroundCast
Document type
User guide

These recycling instructions guide you on the end-of-life treatment of this Vaisala product. As waste regulations and infrastructure vary in each country, these instructions only indicate the different components to be separated and common ways to handle them. Always follow local requirements when disposing of the product. Vaisala encourages to use the best available recycling practices to minimize related environmental impacts.

Vaisala is committed to meeting the requirements of the EU Waste Electrical and Electronic Equipment (WEEE) Directive. This directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing reuse and recycling, and reducing the amount of WEEE going to landfill. This symbol indicates that the product should be collected separately from other waste streams and treated appropriately.

Vaisala GroundCast is designed to function in rough conditions below the ground level. Due to the waterproof design of the device, the Li-SOCl2 batteries are not easily removable. Recycle the device as hazardous battery waste in one piece.

WARNING

Do not attempt to remove the batteries from the device as this may lead to serious injury or death due to high electrical voltage and/or energy.

The recycling of batteries must only be conducted by fully trained personnel of licensed recyclers.

WARNING

The sensor contains a battery, which poses a fire, explosion, and severe burn hazard.

Do not crush, disassemble, heat above 100 °C (212 °F), or incinerate.

Recycle the device in accordance with local hazardous waste management practices and regulations.

Recycling Part Material

  Hazardous waste

1 Various, including methylene diphenyl diisocyanate and oligomers

  Battery waste

2 Various, including lithium thionyl chloride battery

  Metal waste

3 Aluminum and stainless steel
4 Aluminum, stainless steel, and red brass (gunmetal)
5 Aluminum and steel

  Plastic waste

6 Polyxymethylene (POM)