Device details - Jade Smart Cloud

Jade Smart Cloud User Guide
Product status
Document code
M212670EN-B
ft:locale
en-US
Product
Jade Smart Cloud
Document type
User guide

You can view device details by selecting a device in Devices > Manage devices. The details depend on the device type.

Active device alerts are shown in the bell icon in the device details.

The Overview tab shows the following:

  • Device status, such as the battery level and signal strength
  • Connected devices or access point
  • Measurement parameters that are available from the connected probes, and if they are linked to a measurement location.
Overview of a CWL100 data logger showing battery level, signal strength, the connected CA10 access point, the connected HMP115 probe with measurement parameters temperature and relative humidity. An active critical alert is shown in the bell icon.

The Device properties tab shows the following:

  • Device configuration, for example the firmware and software versions
  • Installation location and other device properties
Device properties of a CWL100 data logger showing the installation location, measurement units that are shown on the device display, device serial number, hardware and software version.

The Inputs & outputs tab shows the following:

  • Measurement inputs and outputs, for example connected probes.
  • Serial number and calibration date for measurement probes.
Inputs and outputs of a CWL100 data logger showing the details of the connected probe.