Overview of CLI commands and parameters - AQT530

AQT530 CLI commands include the following:

• AQT530 identification commands: motd, uname
• System control command: reboot
• Configuration commands: date, initconf, set, show, write
• Measurement output command: meas
• LPC identification command: lpc
• Device status command: status

The AQT530 parameters include a set of read-only and read/write parameters.

Read/write parameters:

• Modbus interface configuration parameters Table 1
• Temperature unit parameter Table 2
• LPC measurement interval Table 3
• Linear correction parameters for gases Table 4
• Linear correction parameters for particles Table 5

Read-only parameters:

• Device identification parameters Table 6
• Base module identification parameters Table 7
• Base module monitoring parameters Table 8
• Gas measurement configuration and diagnostics parameters Table 9
• LPC parameters Table 10
• Temperature and humidity probe (TH) probe parameters Table 11