Installing the driver for the USB service cable - MGP261 - MGP262 - SWINSIGHT10

MGP260 User Guide
Document code
M212504EN
Revision
C
Language
English
Product
MGP261
MGP262
Document type
User guide

Only Windows® operating systems are supported by the driver of the USB service cable.

  1. Connect the USB service cable to a USB port on your computer. Windows® detects the new device and installs the appropriate driver.
  2. Open Devices and Printers from the Windows® Start menu. Use search to find it if necessary (search for "devices").
  3. Locate the cable in the list of devices:
    • If the device is listed as Vaisala USB Device with a COM port number in brackets, the cable is ready for use. Take note of the COM port number for later use.
    • If the device is listed as Vaisala USB Instrument Cable without a COM port number listed, you must install the driver manually.
  4. To install the driver manually:
    1. Disconnect the USB service cable from the computer.
    2. Download the Vaisala USB driver at www.vaisala.com/software (search and select the appropriate USB Instrument Driver Setup for your cable).
    3. Run the USB driver installation program Vaisala USB Device Driver Setup.exe. Accept the installation defaults.
    4. Go back to 1 and verify that the driver installation works as expected.